Peaty's built its name on keeping drivetrains running sweetly, and the Monarch is the brand's first go at the one contact point every rider notices. It was developed for riders spending long days out - the sort of saddle that should disappear underneath you rather than remind you it is there.
Comfort comes from the combination of Throne Foam, a flex-tuned base and a suspended rail system, with a pressure relief channel through the centre and a broad 145mm rear platform for support when you are seated. The nose is flat and compact so it holds you in place on steep climbs without restricting movement, and the 45mm stack height leaves plenty of room for dropper post insertion.
This is the range-topping Ti-MX version, running lightweight Ti-MX titanium alloy rails over the same nylon base. Titanium saves around 22g over the chromoly version and adds a touch of natural compliance, which takes a little more of the edge off rough, rooty ground.
The clever part is what happens after the first winter. Saddles live in a filthy environment, and grit working into the rails and lugs is what causes the creaking that usually signals the end of a saddle's life. Rather than treat that as inevitable, Peaty's made the Monarch fully serviceable - any rider can strip it, clean it, re-grease it and rebuild it, which means a lot more silent miles out of one saddle.
It has been tested over more than 1,000km by test riders through a British winter, and every Monarch is covered by Peaty's 30-Day Comfort Guarantee: ride it as normal for 30 days and if you do not get on with it, send it back.
Features
- Throne Foam cushioning paired with a flex-tuned base to take the sting out of rough trails
- Suspended rail system absorbs trail chatter without deadening the feel of the ground
- Pressure relief channel down the centre to reduce concentrated pressure
- Broad 145mm rear platform for balanced support when you are sat down and pedalling
- Compact flat nose supports seated climbing without getting in the way when you move around
- 45mm stack height keeps things low and leaves room for maximum dropper post insertion
- Reinforced shoulders to help shrug off crash damage
- Hidden hike-a-bike handle
- Seamless cover made with 24% post-consumer recycled PET
- Fully serviceable - strip it down, clean, re-grease and rebuild rather than binning it
- Backed by Peaty's 30-Day Comfort Guarantee
Specification
- Rails: Ti-MX titanium alloy
- Base: flex-tuned nylon
- Padding: Throne Foam
- Cover: seamless, 24% post-consumer recycled PET
- Rear platform width: 145mm
- Stack height: 45mm
- Weight: 240g
- Colours: Black, Mango Orange, Red, Slate Grey, Turquoise Blue
- Serviceable: yes - full strip, clean and rebuild
- Guarantee: Peaty's 30-Day Comfort Guarantee
Monarch Saddle - Ti-MX Rail
Order within [time] for delivery by [date]
90 Day Returns
Peaty's built its name on keeping drivetrains running sweetly, and the Monarch is the brand's first go at the one contact point every rider notices. It was developed for riders spending long days out - the sort of saddle that should disappear underneath you rather than remind you it is there.
Comfort comes from the combination of Throne Foam, a flex-tuned base and a suspended rail system, with a pressure relief channel through the centre and a broad 145mm rear platform for support when you are seated. The nose is flat and compact so it holds you in place on steep climbs without restricting movement, and the 45mm stack height leaves plenty of room for dropper post insertion.
This is the range-topping Ti-MX version, running lightweight Ti-MX titanium alloy rails over the same nylon base. Titanium saves around 22g over the chromoly version and adds a touch of natural compliance, which takes a little more of the edge off rough, rooty ground.
The clever part is what happens after the first winter. Saddles live in a filthy environment, and grit working into the rails and lugs is what causes the creaking that usually signals the end of a saddle's life. Rather than treat that as inevitable, Peaty's made the Monarch fully serviceable - any rider can strip it, clean it, re-grease it and rebuild it, which means a lot more silent miles out of one saddle.
It has been tested over more than 1,000km by test riders through a British winter, and every Monarch is covered by Peaty's 30-Day Comfort Guarantee: ride it as normal for 30 days and if you do not get on with it, send it back.
Features
- Throne Foam cushioning paired with a flex-tuned base to take the sting out of rough trails
- Suspended rail system absorbs trail chatter without deadening the feel of the ground
- Pressure relief channel down the centre to reduce concentrated pressure
- Broad 145mm rear platform for balanced support when you are sat down and pedalling
- Compact flat nose supports seated climbing without getting in the way when you move around
- 45mm stack height keeps things low and leaves room for maximum dropper post insertion
- Reinforced shoulders to help shrug off crash damage
- Hidden hike-a-bike handle
- Seamless cover made with 24% post-consumer recycled PET
- Fully serviceable - strip it down, clean, re-grease and rebuild rather than binning it
- Backed by Peaty's 30-Day Comfort Guarantee
Specification
- Rails: Ti-MX titanium alloy
- Base: flex-tuned nylon
- Padding: Throne Foam
- Cover: seamless, 24% post-consumer recycled PET
- Rear platform width: 145mm
- Stack height: 45mm
- Weight: 240g
- Colours: Black, Mango Orange, Red, Slate Grey, Turquoise Blue
- Serviceable: yes - full strip, clean and rebuild
- Guarantee: Peaty's 30-Day Comfort Guarantee