• A Threadless, no tap install option that lets you store the OneUp EDC V2 Tool inside your stem/steerer tube without threading your steerer tube
• The Threadless Carrier replaces your star nut and lets you preload your headset with a bolt, while also creating a space for the EDC Tool
• Compatible with EDC V2 Tool (You must use the small EDC V2 Storage Capsule with the Threadless Carrier.)
• The EDC Threadless Carrier is NOT compatible with V1 EDC Tools

Compatibility -

Most forks are compatible, except for a small number of forks with very short steerer tubes. For the following cases your fork steerer tube length must meet the minimum length requirement.

Fox except Fox 38 with oval steerer = 190mm min

RockShox Forks = 220mm min

All other compatible forks = 190mm min

Measure from the underside of your fork crown to the top of your spacer stack, or top of your stem if you are not running any spacers above your stem

Incompatible forks -

Fox 38 with oval steerer (Use a EDC Threaded install), Rock Shox 35 Forks, Giant Overdrive 2 Forks. Cannondale Lefty Forks. Carbon Steerers