Skip to content
Free Delivery Over £60 | 90-Day Returns | Independent & Rider-Owned Since 2008
Out of stock
  • Kona Process SE 153 29 G2 - Purple
  • Kona Process SE 153 29 G2
  • Kona Process SE 153 29 G2
  • Kona Process SE 153 29 G2
  • Kona Process SE 153 29 G2
  • Kona Process SE 153 29 G2
  • Kona Process SE 153 29 G2
  • Kona Process SE 153 29 G2

The Process 153 SE 29 G2 is an aluminium 29er built for riders who want proper enduro capability without a premium price. A 160mm RockShox Yari fork and 153mm of rear travel give you the support to hit steep, rough descents with confidence, and the big wheels roll over roots and rocks that would hang up a smaller-wheeled bike.

The geometry is modern without being extreme. A 64.5° head angle and 625mm stack on the size L keep the front end calm when the trail points down, while a 76.7° seat angle puts you in a good position to winch back up. Kona has always favoured short back ends, and the 435mm chainstays on every size mean this 29er still turns in quickly and pops off lips rather than feeling like a barge.

The SE build puts the money where it counts. The Yari RC fork and Deluxe Select+ shock handle the suspension, SRAM DB8 four-piston brakes on 200/180mm rotors provide the stopping, and a Maxxis Assegai and Minion DHR II pairing on WTB i30 tubeless-ready rims provides the grip. Gearing comes from a 10-speed microSHIFT Advent X drivetrain with an 11-48t cassette and 30t chainring, and a TranzX internal dropper is fitted as standard.

Features

  • 160mm RockShox Yari RC fork and 153mm rear travel from a RockShox Deluxe Select+ trunnion shock
  • Butted 6061 aluminium frame on 29" wheels
  • 64.5° head angle, 76.6-76.9° seat angle and 435mm chainstays across all sizes
  • microSHIFT Advent X 10-speed drivetrain, 11-48t cassette with a single 30t chainring
  • SRAM DB8 four-piston brakes with 200mm front and 180mm rear rotors
  • Maxxis Assegai 2.5" front and Minion DHR II 2.4" rear on WTB ST i30 TCS rims
  • TranzX internally routed dropper post
  • Boost 110x15mm front and 148x12mm rear spacing

Sizing

We stock this bike in L and XL. Use Kona's height guide below to find your size. If you fall between the two, go for the L for a more playful, easier-to-manoeuvre bike, or the XL for more stability at speed. The key frame measurements for each size are listed underneath so you can compare against the bike you ride now.

  • 175-183cm (5'9"-6'0") - L
  • 180-188cm (6'1"-6'2") - L or XL
  • 185-196cm (6'2"-6'5") - L or XL
  • L - reach 480mm, stack 625mm, seat tube 450mm, standover 710mm, wheelbase 1,244mm
  • XL - reach 515mm, stack 635mm, seat tube 485mm, standover 720mm, wheelbase 1,284mm

Specifications

  • Process SE 153 29 G2
  • DisciplineEnduro

  • MaterialAluminium

  • Front Travel160mm

  • Rear Travel153mm

  • Wheel Size29"

Frame - Kona 6061 butted aluminium, 153mm travel
Fork - RockShox Yari RC Motion Control DebonAir, 160mm, tapered, 110mm Boost
Rear Shock - RockShox Deluxe Select+ Trunnion
Crankset - FSA Comet Heavy Duty, 30t
Bottom Bracket - FSA PF92
Chain - KMC X10
Cassette - microSHIFT Advent X 11-48t, 10-speed
Rear Derailleur - microSHIFT Advent X
Shifter - microSHIFT Advent X
Brakes - SRAM DB8
Rotors - SRAM Centerline, 200mm front, 180mm rear
Headset - FSA No.57B
Handlebar - Kona XC/BC 35
Stem - Kona XC/BC 35
Seatpost - TranzX +RAD internal dropper with Shimano lever, 31.6mm
Seat Clamp - Kona
Saddle - Kona Trail
Grips - Kona Key Grip
Front Hub - Formula, 110x15mm
Rear Hub - Formula, 148x12mm
Spokes - Stainless black 14g
Rims - WTB ST i30 TCS 2.0
Front Tyre - Maxxis Assegai EXO TR Dual 29x2.5" WT
Rear Tyre - Maxxis Minion DHR II EXO TR Dual 29x2.4" WT
Pedals - Not included
Colour - Satin Metallic Mauve with Blue-Grey decals

Kona Process SE 153 29 G2

Process SE 153 29 G2

  • Enduro
  • 160 / 153mm travel
  • 29″ wheels
  • Alloy frame
SKU: B3515329P06
The Process 153 SE 29 G2 is an aluminium 29er built for riders who want proper enduro capability without a premium price. A 160mm RockShox Yari fork and 153mm of Read more
Sale price £1,699 Regular price RRP £1,799 SAVE 6%
Colour

Size
Out of stock

90 Day Returns

£1699.0
Finance is subject to status. Terms and conditions apply.

The Process 153 SE 29 G2 is an aluminium 29er built for riders who want proper enduro capability without a premium price. A 160mm RockShox Yari fork and 153mm of rear travel give you the support to hit steep, rough descents with confidence, and the big wheels roll over roots and rocks that would hang up a smaller-wheeled bike.

The geometry is modern without being extreme. A 64.5° head angle and 625mm stack on the size L keep the front end calm when the trail points down, while a 76.7° seat angle puts you in a good position to winch back up. Kona has always favoured short back ends, and the 435mm chainstays on every size mean this 29er still turns in quickly and pops off lips rather than feeling like a barge.

The SE build puts the money where it counts. The Yari RC fork and Deluxe Select+ shock handle the suspension, SRAM DB8 four-piston brakes on 200/180mm rotors provide the stopping, and a Maxxis Assegai and Minion DHR II pairing on WTB i30 tubeless-ready rims provides the grip. Gearing comes from a 10-speed microSHIFT Advent X drivetrain with an 11-48t cassette and 30t chainring, and a TranzX internal dropper is fitted as standard.

Features

  • 160mm RockShox Yari RC fork and 153mm rear travel from a RockShox Deluxe Select+ trunnion shock
  • Butted 6061 aluminium frame on 29" wheels
  • 64.5° head angle, 76.6-76.9° seat angle and 435mm chainstays across all sizes
  • microSHIFT Advent X 10-speed drivetrain, 11-48t cassette with a single 30t chainring
  • SRAM DB8 four-piston brakes with 200mm front and 180mm rear rotors
  • Maxxis Assegai 2.5" front and Minion DHR II 2.4" rear on WTB ST i30 TCS rims
  • TranzX internally routed dropper post
  • Boost 110x15mm front and 148x12mm rear spacing

Sizing

We stock this bike in L and XL. Use Kona's height guide below to find your size. If you fall between the two, go for the L for a more playful, easier-to-manoeuvre bike, or the XL for more stability at speed. The key frame measurements for each size are listed underneath so you can compare against the bike you ride now.

  • 175-183cm (5'9"-6'0") - L
  • 180-188cm (6'1"-6'2") - L or XL
  • 185-196cm (6'2"-6'5") - L or XL
  • L - reach 480mm, stack 625mm, seat tube 450mm, standover 710mm, wheelbase 1,244mm
  • XL - reach 515mm, stack 635mm, seat tube 485mm, standover 720mm, wheelbase 1,284mm

Specifications

  • Process SE 153 29 G2
  • DisciplineEnduro

  • MaterialAluminium

  • Front Travel160mm

  • Rear Travel153mm

  • Wheel Size29"

Frame - Kona 6061 butted aluminium, 153mm travel
Fork - RockShox Yari RC Motion Control DebonAir, 160mm, tapered, 110mm Boost
Rear Shock - RockShox Deluxe Select+ Trunnion
Crankset - FSA Comet Heavy Duty, 30t
Bottom Bracket - FSA PF92
Chain - KMC X10
Cassette - microSHIFT Advent X 11-48t, 10-speed
Rear Derailleur - microSHIFT Advent X
Shifter - microSHIFT Advent X
Brakes - SRAM DB8
Rotors - SRAM Centerline, 200mm front, 180mm rear
Headset - FSA No.57B
Handlebar - Kona XC/BC 35
Stem - Kona XC/BC 35
Seatpost - TranzX +RAD internal dropper with Shimano lever, 31.6mm
Seat Clamp - Kona
Saddle - Kona Trail
Grips - Kona Key Grip
Front Hub - Formula, 110x15mm
Rear Hub - Formula, 148x12mm
Spokes - Stainless black 14g
Rims - WTB ST i30 TCS 2.0
Front Tyre - Maxxis Assegai EXO TR Dual 29x2.5" WT
Rear Tyre - Maxxis Minion DHR II EXO TR Dual 29x2.4" WT
Pedals - Not included
Colour - Satin Metallic Mauve with Blue-Grey decals

Reviews

This bike hasn't been reviewed yet. Biketart is rated a Top Quality Store by Google, and our team of riders is happy to answer any questions before you buy.

Talk to a rider

You may also like

Recently Viewed