The EVO V6Ti Mono Edition is a super-limited run disc brake set from UK component masters Hope. This very special brake set offers outrageous performance, and lets be honest, looks incredibly cool.

Availability - Only 1000 will be made for the whole planet. We have a set of the 220mm/200mm with Black Hose coming in, contact us to get them on pre-order.

It is an evolution of one of the most iconic brakes the brand has ever made, reworked for the modern day with exceptional power, serious heat management and an unmistakable finish.

At the heart of the system sits a single piece CNC-machined caliper, shaped to deliver the best possible stiffness-to-weight ratio while maximising surface area for heat management. Inside, titanium pistons keep performance consistent when things get hot. Each piston is Ti-Nitride coated to cut friction and improve durability, and cross drilled to aid cooling. A radial mount does away with the constraints of post mount, making room for a larger caliper body, bigger pistons and larger pads. The result is consistent, confidence inspiring braking, even under prolonged and extreme use.

The brake is paired with the new T-Slot Vented Rotor, developed specifically to manage heat. Cooling fins between the braking surfaces bring rotor temperatures down, while the T-slot floating design lets the outer rotor fully float to resist distortion under load. The outer rotor is replaceable too, so a worn rotor does not mean replacing the whole thing. Completing the system is the EVO Master Cylinder, available with standard or power levers to suit your preferred feel.

To mark 20 years since the original Mono 6Ti, this Mono Edition is limited to just 1,000 brake sets worldwide. It features a distinctive black and gold colourway inspired by the original, a special etch and a unique serial number, making each set a genuine collector's item. Sets are available with braided or standard hose, and in 200/200mm, 220/200mm or 220/220mm rotor combinations.

Features

• Single piece CNC machined caliper for the ultimate stiffness to weight ratio
• Large surface area to manage heat effectively
• Titanium pistons for consistent performance in the most extreme conditions
• Ti-Nitride coated pistons for low friction and increased wear resistance
• Cross drilled pistons to aid cooling
• Radial mount design allows a larger caliper, bigger pistons and larger pads for more power, more consistency and increased stiffness
• New T-Slot Vented Rotor with internal cooling fins, showing up to 15% less heat buildup than the brand's floating rotors
• Three piece floating outer rotor with a replaceable vented outer
• Allows direct mounting of an e-bike speed sensor magnet
• EVO Master Cylinder with a choice of standard or power levers
• Limited to 1,000 sets, with a black and gold colourway, special etch and unique serial number

Specification

• Discipline: Downhill, enduro and e-bike
• Caliper: Single piece CNC-machined, radial mount
• Pistons: Titanium, Ti-Nitride coated and cross drilled
• Mount compatibility: Postmount forks and frames (PM180, PM200, PM203) with 200mm or 220mm discs; requires a dedicated brake mount (+20mm disc diameter)
• Disc compatibility: 2.3mm and 3.3mm (vented) discs
• Rotor: T-Slot Vented, 3.3mm thickness (minimum 2.9mm), 6-bolt fitment, black centre
• Rotor sizes available: 200mm, 203mm and 220mm
• Hose options: Standard or braided
• Colourway: Black and gold with unique serial number
• Limited run: 1,000 sets worldwide