Fabric Proof is a next-generation durable water repellent (DWR) that brings life back to kit which has stopped shrugging off the weather. Gtechniq has spent more than 20 years protecting automotive and marine surfaces, and the same smart surface chemistry now goes into a spray for jackets, tights, gloves, packs and shoes.
The headline is how little faff is involved. Most reproofers need heat to activate, meaning a tumble dry or a going-over with an iron, and a cure time of 24 hours or more. This one air cures in roughly three hours with no heat at all, so you can treat a jacket in the morning and ride in it the same afternoon. It is also PFAS free, which matters more with every season as the chemistry behind traditional DWR gets phased out.
Durability is where it separates itself. A typical DWR treatment starts fading after two or three washes; Fabric Proof holds strong water repellency through up to 10 wash cycles, and the performance has been independently tested to recognised textile standards. Breathability is unaffected, so garments still move moisture the way they were designed to, and the formula adds odour-control and improved abrasion resistance, which helps kit keep its appearance and colour for longer. The soft, natural handle of the fabric stays put too.
It works across all fabric types, from technical outer layers and bibshorts to cotton T-shirts, trainers and hiking boots. Pick the 250 ml bottle for a jacket or two, or the 500 ml if you are proofing a full winter wardrobe.
Features
- PFAS-free formula
- No heat activation required, so no tumble drying or ironing
- Fast air cure in approximately 3 hours
- Durable water repellency through up to 10 wash cycles
- Maintains fabric breathability
- Antimicrobial with odour-control technology
- Enhanced abrasion resistance helps fabrics keep their appearance and colour
- Retains the soft, natural feel of the fabric
- Suitable for all types of fabric
- Independently tested to recognised textile standards
How to Use
- Make sure the fabric is completely dry before starting
- Apply in a well-ventilated area
- Spray Fabric Proof over the entire surface until the fabric is fully covered and damp
- Wipe away any excess product with a microfibre cloth
- Allow the fabric to dry for 3-4 hours before use
- Do not over-spray onto surrounding surfaces
- Store in a cool, dry place
Specification
- Type: Durable water repellent (DWR) fabric treatment
- Chemistry: PFAS free
- Application: Spray on, no heat activation
- Cure time: Approximately 3 hours air cure
- Durability: Up to 10 wash cycles
- Suitable for: Outdoor apparel, technical textiles, tights and bibshorts, T-shirts and jerseys, shoes and trainers
- Sizes: 250 ml, 500 ml
Fabric Proof
Order within [time] for delivery by [date]
90 Day Returns
Fabric Proof is a next-generation durable water repellent (DWR) that brings life back to kit which has stopped shrugging off the weather. Gtechniq has spent more than 20 years protecting automotive and marine surfaces, and the same smart surface chemistry now goes into a spray for jackets, tights, gloves, packs and shoes.
The headline is how little faff is involved. Most reproofers need heat to activate, meaning a tumble dry or a going-over with an iron, and a cure time of 24 hours or more. This one air cures in roughly three hours with no heat at all, so you can treat a jacket in the morning and ride in it the same afternoon. It is also PFAS free, which matters more with every season as the chemistry behind traditional DWR gets phased out.
Durability is where it separates itself. A typical DWR treatment starts fading after two or three washes; Fabric Proof holds strong water repellency through up to 10 wash cycles, and the performance has been independently tested to recognised textile standards. Breathability is unaffected, so garments still move moisture the way they were designed to, and the formula adds odour-control and improved abrasion resistance, which helps kit keep its appearance and colour for longer. The soft, natural handle of the fabric stays put too.
It works across all fabric types, from technical outer layers and bibshorts to cotton T-shirts, trainers and hiking boots. Pick the 250 ml bottle for a jacket or two, or the 500 ml if you are proofing a full winter wardrobe.
Features
- PFAS-free formula
- No heat activation required, so no tumble drying or ironing
- Fast air cure in approximately 3 hours
- Durable water repellency through up to 10 wash cycles
- Maintains fabric breathability
- Antimicrobial with odour-control technology
- Enhanced abrasion resistance helps fabrics keep their appearance and colour
- Retains the soft, natural feel of the fabric
- Suitable for all types of fabric
- Independently tested to recognised textile standards
How to Use
- Make sure the fabric is completely dry before starting
- Apply in a well-ventilated area
- Spray Fabric Proof over the entire surface until the fabric is fully covered and damp
- Wipe away any excess product with a microfibre cloth
- Allow the fabric to dry for 3-4 hours before use
- Do not over-spray onto surrounding surfaces
- Store in a cool, dry place
Specification
- Type: Durable water repellent (DWR) fabric treatment
- Chemistry: PFAS free
- Application: Spray on, no heat activation
- Cure time: Approximately 3 hours air cure
- Durability: Up to 10 wash cycles
- Suitable for: Outdoor apparel, technical textiles, tights and bibshorts, T-shirts and jerseys, shoes and trainers
- Sizes: 250 ml, 500 ml