Peaty's Chris King Tubeless MK2 Valves

Product Reference: VAR-PT-PTV2-42-BLK
  • £24.99

With design, sustainability & quality running right to the core, there's only one company we could work with on our valve colours - Chris King! With our valves for life guarantee and their stunning colourways, your bike is in for a real treat for years to come.

Made from premium lightweight, high strength 7075 aluminium, Peaty's MK2 Tubeless Valves fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.

Our unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, our valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.

Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal.

Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.

Crushed a rubber or snapped an o-ring? No problem, check out our maintenance kits to spruce up your valves when swapping to your next set of wheels or new bike.

 

INSTRUCTIONS

  1. Remove valve cap, o-ring and lock nut.
  2. Insert valve through valve hole in rim.
  3. Push the o-ring onto valve stem.
  4. Thread the lock nut onto valve stem.
  5. Hand tighten lock nut until firm.
  6. Screw on valve cap.
Loading...
| In Stock

With design, sustainability & quality running right to the core, there's only one company we could work with on our valve colours - Chris King! With our valves for life guarantee and their stunning colourways, your bike is in for a real treat for years to come.

Made from premium lightweight, high strength 7075 aluminium, Peaty's MK2 Tubeless Valves fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.

Our unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, our valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.

Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal.

Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.

Crushed a rubber or snapped an o-ring? No problem, check out our maintenance kits to spruce up your valves when swapping to your next set of wheels or new bike.

 

INSTRUCTIONS

  1. Remove valve cap, o-ring and lock nut.
  2. Insert valve through valve hole in rim.
  3. Push the o-ring onto valve stem.
  4. Thread the lock nut onto valve stem.
  5. Hand tighten lock nut until firm.
  6. Screw on valve cap.
Showing our 1 review for Peaty's Chris King Tubeless MK2 Valves. Write a review
Review Summary - 5 out of 5 based on 1 rating.
December 4, 2020 | Jc
Peatys tubeless tire valves

When these bad boys arrived whacked em on .. and nealry had a lityle accident in my pants xxxx sexual

Biketart Ltd

UK Delivery

All orders over £30 are eligible for free delivery

Standard 2-3 Days
Free delivery for orders over £30 otherwise £2.99

Priority 1-2 Days
Priority orders are given priority and go on a faster delivery service for when you need something quickly. 
£3.99

Next Day Courier Delivery
We aren't currently offering this as our carriers cannot guarantee next-day at present.

 

European Delivery

As of 23rd December 2020 we have suspended European delivery due to Brexit and Coronavirus chaos. We will monitor the situation and resume international delivery as soon as possible.

 

We deliver to most countries in Europe. Small items are sent by Royal Mail or DPD. 

EU: Free delivery on all orders over £150 or £7.99 on orders under £150

Outside EU: Free delivery on all orders over £150 or £9.99 on orders under £150

 

European Bike Delivery

Bikes are delivered by DPD or TNT.

EU: £90

Outside EU: £139

 

Returns

You can return any item within 30 days in original condition for a full refund or exchange. A returns label (unpaid) is included with all UK orders.

You can pay for your order with one of the following payment methods. 

  • Credit or debit card
  • AMEX
  • PayPal
  • Amazon Pay
  • DEKO 0% Finance
Top