Dynaplug Air MTB Repair & Inflation Kit

Product Reference: P-DP0012
  • £59.99
  • “Dynaplug works wonders. It’s been in my kit bag since I got it and I’m keeping it there" - Singletrack Magazine
  • All-in-one tubeless mountain bike tyre repair and re-inflation solution, a faster repair system does not exist!
  • Mountain bike tyre specific kit
  • Repair takes seconds - no need to remove tyre, just plug and ride
  • Sealant-friendly plug bonds with tyre for permanent repair
  • Non abrasive tip will not damage rim or rim tape
  • Kit includes - Dynaplug air valve body, stainless steel repair nozzle/insertion tube, 4x soft nose plugs, storage pouch, inflation hose and pipe cleaners (CO2 Cartridges are NOT included)

 

Loading...
| In Stock

“Buy If: You ride on tubeless tyres, like, ever. Don’t Buy If: You don’t ride tubeless tyres or like walking home” - VeloNews

“What tubeless plugs are best? Without sounding dramatic there are Dynaplugs and then everything else.” - Cyclingtips

“The original, and still the best – Dynaplug will fix your flat and get you moving again. “ - Bike Rumor (2018 editors choice)

An all in one tyre repair and re-inflation solution, there is no faster way to get yourself back up and rolling than the Dynaplug Air
Dynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done!
The Air system has an added twist. If a tyre has lost too much pressure, just discharge the CO2 cartridge to re-inflate the tyre before withdrawing the plug insertion tool, leaving you ready to go in seconds
The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape
No need to remove the tyre, no messy glues or solvents, just plug and ride!
Long MTB version designed to ensure the CO2 vents end up well inside the tyre, even past aggressive treads, for 35c or smaller road tyres please use our ROAD Air with a shorter insertion tube
A plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the location
CO2 can be dangerous, please read the instructions fully and wear gloves and eye protection, it's also a good idea to give the Air system a try at home before you need to do it 'in the field'
Kit features a precision machined air valve body, stainless steel repair nozzle/insertion tube, 4 x soft nose standard plugs and a storage pouch
In addition, there's an air hose for CO2 inflation if you just need to air up through the valve stem
Made with pride in the USA using patented technology and warrantied for life under normal usage

Here's how it works - 

1. Remove the cause of the puncture
2. Push the insertion tube straight into the hole
3. If required discharge C02 cartridge to inflate tyre
4. Extract the tool depositing the repair plug - done!

 

Be the first to review Dynaplug Air MTB Repair & Inflation Kit. Write a review

All in-stock items are dispatched quickly by Royal Mail or courier. Most orders placed by 4pm are sent the same day. There are multiple delivery options available for you at the checkout.

You can return any item within 30 days in original condition for a full refund or exchange.

You can pay for your order online by card or PayPal. Our credit card payments are powered by Sage and are fully encrypted.

Top